Atlona AT-OME2-D2311 - Omega2 HDBaseT Video Receiver, 100m

The Atlona AT-OME2-D2311 is an Omega2 HDBaseT 3.0 receiver that delivers uncompressed HDMI 2.0 video up to 4K@60Hz 4:4:4, with HDCP 2.2, from a compatible transmitter up to 330 feet (100 meters) away over a single Cat 6A cable. Four USB 2.0 Type-A DEVICE ports extend keyboards, mice, cameras, and other USB peripherals back to the host computer at up to 480 Mbps, with two high-power ports for demanding devices. The receiver also provides analog audio output of the transmitter's pass-through audio, de-embedded HDMI audio, bi-directional RS-232, and 1 Gbps Ethernet pass-through. Bi-directional Power over HDBaseT (PoH) lets the included 12 V power supply power both the receiver and the transmitter. A front-panel DIP switch sets the RS-232 port for pass-through or firmware update. The AT-OME2-D2311 pairs with the AT-OME2-E2311 transmitter, the AT-OME2-E2321-WP wall plate transmitter, and the AT-OME2-R2742 switcher.

Features
• HDBaseT 3.0 receiver — uncompressed HDMI 2.0 up to 4K@60Hz 4:4:4 8-bit; HDCP 2.2
• Up to 330 ft at 4K@60Hz 4:4:4 over Cat 6A; 230 ft at 4K@60Hz 4:2:0 over Cat 5e/6
• HDR support, including Dolby Vision and HDR10+
• 4× USB 2.0 Type-A DEVICE ports at up to 480 Mbps; 2 ports supply up to 1.4 A
• HDMI audio pass-through including Dolby Atmos, Dolby TrueHD, DTS-HD Master Audio
• Analog AUDIO OUT for the transmitter's pass-through audio, plus a de-embedded AUDIO OUT
• 1000/100 Mbps Ethernet pass-through over the HDBaseT link
• Bi-directional RS-232 pass-through
• Bi-directional PoH — the included 12 V power supply powers both units
• Mounting brackets included for surface installation
• Pairs with the AT-OME2-E2311, AT-OME2-E2321-WP, and AT-OME2-R2742