The ClearSonic S2466 is a 24-inch x 66-inch SORBER baffle that can be used as part of a large format lid system, attached to walls, or hung from ceilings as general acoustic treatment.
Efficient Noise Reduction
SORBER baffles don't just redirect sound - they absorb it. SORBER's NRC ratings are greater than 90%.
Freestanding or Tackable
Set up S4-2 or S5-2 SORBER in freestanding mode and avoid messing up your walls by gluing, nailing, screwing, etc. Reconfigure your room setup quickly and easily. Also, SORBER case fabric is "Velcro receptive". If desired, SORBER can be held against a surface using standard Velcro hook. S2 SORBER squares attach to ClearSonic Panels this way. Use the Velcro flaps to attach adjacent S4-2 or S5-2 baffles to each other.
Durable
Made from a super tough carpet "trunk" cloth (polypropylene with a latex backing) that can take the abuse of the road. 1.5" thick rigid fiberglass section instead of less expensive materials because of it's fire resistance and superior sound absorbing properties.
Low Cost
SORBER systems are mass produced. Our prices are lower because we take advantage of economies of scale.
Fire Resistant
All SORBER products have a Class A fire rating. To be considered 'Class A', a product must have a Flame Spread of less than 25 and a Smoke Developed Index rating of less than 450. SORBER products have a Flame Spread index of 0 and a Smoke Developed index of 65. Testing was performed by Omega Point Lab using the ASTM E84 Test Standard.
