The Key Digital KD-EX18G is a 4K UHDoTP with HDR HDMI Extender Tx and Rx Kit. Extends 4K 18G to 35m (115ft), 1080p to 50m (164ft). 4K to 1080p Down-Conversion, HDMI Pass Thru, Power over CAT, 2 Way IR, Handshake Control, Forced HPD.
Features
• UHDoTP via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
• 4K Resolution Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
• Visually Lossless Compression: 18G enabling technology applied to all video formats exceeding 10.2Gbps to accommodate UHDoTP transmission channel
• 4K to 1080p Down Convert: Optional resolution conversion applied at UHDoTP output provides added integration options in retrofit installations as well as added distance performance
• 10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension
• Flexible Power over CAT (PoC): Only one power connection needed. Tx may power Rx, or Rx may power Tx.
• Low Profile: Slim chassis design
• Signal Extension: For resolution and cable quality
- 4K/UHD up to 35m (115ft) using CAT5e/6, up to 40m (131ft) using CAT6A STP
- 1080p up to 50m (164ft) maximum, up to 60m (197ft) using CAT6A STP
- Minimum 5m (17ft) CAT5e/6 cable length required for all resolutions
• HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
• HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
• Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:2:2/8 bit
• EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx
• Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected display/output device
• Full Buffer System: Manages TMDS re-clocking/signal re-generation, HDCP authentication with source & display, EDID handshake control, and Hot Plug Detection control
• IR Sensor: Sensor powering via +5V on IR In port collects line-of-sight IR from remote(s) without external IR connecting block
• Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
• HDMI Pass-Through: Enables connection to local monitor or AV Receiver.
• Surround Audio Support: On HDMI pass-thru and UHDoTP outputs:
- HDMI Pass-Thru supports Dolby, Dolby TrueHD, DTS and DTS-HD
- UHDoTP Output supports Dolby, DTS (formats up to 5.1/6.1)
