The Lumantek ez-SHV+ is a SDI to HDMI Converter with a built-in LCD display. You can easily monitor in/output resolution, cable length, and eye-pattern at once. By using the dip switches on the back, you can select the resolution from 480i to 1080p and control the LCD brightness and screen ratio.
24/7 Video Monitoring
Through the 2.7 inch TFT LCD screen, you can instantly monitor eye-pattern, in/output source resolution, and cable length.
Audio Level Meter
It's easy to check what is being played on the LCD screen. You can also check the sound through the audio level meter on the screen what is being played.
Wall Mountable
ez-SHV+ has a wall mount option. You can alternative choose to set up at wall or not by changing side bracket.
Detect Cable Length Automatically
ez-SHV+ detects cable length automatically up to 190 m at 3G-SDI. Cable length will be shown as 'SHORT', 'MEDIUM' and 'LONG'.
Low Power Consumption
The Maximum power consumption of ez-SHV+ is less than 3 watts. Acceptable voltage ranges from 5v ~ 18v giving the user more flexibility while connecting electricity.
Mirrored Output for Teleprompter
Output can vertically flip (mirror) the HDMI output by pressing the mode switch for more than 6 seconds while the LCD is OFF. It's a perfect use for teleprompters and supports only HD resolutions.
Eye-Pattern (Eye-Diagram)
ez-SHV+ is useful for checking the input SDI cable’s quality as a simple measurement tool through the displaying of eye-pattern. If the eye-pattern shows thick, then it means input video signal quality is poor.
Input Ports
1 x SDI
Output Ports
1xHDMI
1 x SDI (Loop through)
