To hear what's really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The Temblor T8 and T10 let you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range. An ideal companion to Eris and Sceptre active reference monitors and Ceres BT-series active speakers, Temblor-series subwoofers complement full-range monitors without overshadowing them, extending the reach of your full-range system's low end with a musical and natural approach. Powerful and musical, Temblor features high-quality components and design that enable it to deliver fast and accurate transient response, extending low frequencies without a hint of "tubbiness" or overshoot.
Designed for recording studios, the PreSonus Temblor T10 is a front-firing active subwoofer with a 10-inch glass-composite driver, built-in crossover, high-temperature voice coil, and damped rubber surround. Its cabinet features a front-firing, bass-reflex acoustic port and optimized, resonance-suppressing internal bracing. The enclosure has integrated, gravity-calibrated rubber feet for stable placement. In addition to outstanding accuracy and a frequency response that ranges from 20 Hz to 130 Hz, this combination of features enables the T10 to produce higher volume - up to 113 dB SPL - with less power than a sealed-box design. But make no mistake, the T10 has plenty of juice: 250 watts of Class AB power.
Ins and Outs
The Temblor T10 provides a choice of three input pairs: two sets of balanced inputs (XLR and 1/4" TRS) and one pair of RCA unbalanced inputs. Pairs of inputs are provided in order to accept a stereo signal from your audio source. When both of the balanced connections are in use, the TRS inputs will take precedence over the XLR inputs. The RCA inputs will sum into either balanced connection. You get two pairs of balanced outputs: XLR and 1/4" TRS. The full-range signal connected to the stereo inputs on the T10 is passed through to these outputs so you can connect them to your main left and right studio monitors. If the High Pass Filter switch is engaged, frequencies below 80 Hz are not sent from these outputs. The T10 also has a balanced XLR output that sends the low-frequency signal from the lowpass filter to a second Temblor T10 for the ultimate in smooth low end.
• 10-inch, front-firing, glass-composite low-frequency transducer
• Front-firing, bass-reflex acoustic port
• 250 watt, Class AB amplification
• Left and right, balanced XLR and 1/4" TRS and unbalanced RCA main inputs
• Left and right, balanced XLR and 1/4" TRS outputs
• XLR subwoofer output for connecting a second T10
• Input gain control (-30 dB to +6 dB, continuously variable)
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Built-in crossover
• Switchable highpass filter